
An energy efficient mortgage (EEM) lets you finance energy-saving upgrades inside the same loan you use to buy or refinance a home, instead of paying for them separately. The EPA describes an EEM as including clean-energy improvements in a single primary mortgage, and the main versions come from FHA, VA, Fannie Mae and Freddie Mac. Each has its own limits, so the right choice depends on your loan type, your home and how much work you plan to do. A mortgage broker who compares lenders for you can match the loan to the upgrades and keep the paperwork moving.
TL;DR
- An EEM folds the cost of efficiency upgrades into your purchase or refinance loan, so there is no second loan to manage.
- FHA allows the greater of $4,000 or 5% of the property’s value, up to $8,000. VA caps financing at $6,000. Fannie Mae and Freddie Mac allow up to 15% of the as-completed value.
- Most versions require an energy assessment, and the upgrades must be cost-effective or save more than they add to your payment.
- The test that matters is simple: do your verified monthly energy savings equal or exceed the added monthly loan cost?
- The loan you choose decides which EEM you can use, so settle the loan type first.
Table of Contents
- What an energy efficient mortgage is
- The main U.S. options side by side
- FHA energy efficient mortgage
- VA energy efficient mortgage
- Fannie Mae and Freddie Mac conventional options
- How to get an energy efficient mortgage, step by step
- Do the savings beat the added cost?
- Which situations suit an EEM
- What to keep in mind on rules
- Start with the right loan
- FAQ
- Sources
What an energy efficient mortgage is
A standard mortgage covers the price of the home. An EEM adds a second line to the same loan: the cost of improvements that reduce the home’s energy use. Think insulation, air sealing, a high-efficiency heating system, a heat pump or solar panels.
The idea is that lower utility bills free up cash each month. According to the EPA, underwriting accounts for the increased cash flow from those efficiency improvements, and borrowers may need technical help such as an energy audit. The EPA also lists Fannie Mae, Freddie Mac, FHA, VA and USDA among the agencies and government-sponsored enterprises that offer EEMs.
Two terms worth knowing:
- HERS rating: a Home Energy Rating System report, written by a certified rater or energy consultant, that estimates how efficient a home is and which upgrades make sense.
- As-completed value: the appraised value of the home assuming the planned improvements are finished.
You can use an EEM for a purchase or a refinance. That makes it relevant to first-time buyers buying an older home, owners refinancing for a lower rate, and veterans who want to upgrade at closing.
The main U.S. options side by side
There is no single national EEM. Each program attaches to a different loan, and the limits differ.
| Program | Works with | Financing limit | Key condition |
|---|---|---|---|
| FHA EEM | FHA purchase and refinance loans | Greater of $4,000 or 5% of property value, up to $8,000 | Cost-effective upgrades, written energy report |
| VA EEM | VA purchase and refinance loans | Up to $6,000 | Higher tier needs bids and savings certification |
| Fannie Mae HomeStyle Refresh | Purchase or limited cash-out refinance of an existing home | Up to 15% of as-completed value | Not available for cash-out refinance or new construction |
| Freddie Mac GreenCHOICE | Any Freddie Mac mortgage product, property type and term up to 30 years | Up to 15% of as-completed value | Qualifying efficiency improvements |
Sources for each row are linked in the sections below.
FHA energy efficient mortgage
If you are using an FHA loan, the FHA EEM is the version to ask about. HUD’s FHA program overview says it can be used with purchases, refinances and streamline refinances, and alongside programs such as 203(b) and 203(k). It covers new and existing one-to-four-unit properties, one-unit condominiums and manufactured housing.
What the HUD guide spells out:
- Amount: eligible, cost-effective improvements may be financed up to the greater of $4,000 or 5% of the property’s value, not exceeding $8,000.
- Assessment: a qualified HERS representative or energy consultant inspects the property, or reviews plans for new construction, and provides a written report.
- Cost-effectiveness: improvement costs, including maintenance over their useful life, must be less than the present value of the energy savings over that life. Estimated actual savings cannot substitute for that calculation.
- Qualifying: the financed improvement amount does not require additional borrower qualification, and no separate appraisal of the energy improvements is needed.
- Fees: rating fees must be customary and reasonable, and may be financed if the package is cost-effective.
- Timing: the escrow for the work is established for no more than 90 days, or 180 days for a Section 203(k) rehabilitation mortgage.
The Congressional Research Service adds that FHA EEM borrowers and properties must satisfy FHA underwriting requirements, obtain a qualified home-energy assessment and apply through an FHA-approved lender. FHA insurance also involves borrower fees. If you are still deciding whether FHA is your loan, our FHA loans page covers the basics, and our guide to FHA streamline refinancing explains that route for current FHA borrowers.
VA energy efficient mortgage
For eligible veterans, the VA version lets you roll approved permanent improvements into a VA purchase or refinance. VA’s July 21, 2026 guide says examples include solar heating and cooling, weather-stripping or caulking, added insulation, and storm windows or doors.
The same guide sets out two tiers:
- Up to $3,000: financing is based on the documented cost of the improvements.
- $3,000 through $6,000: you need itemized bids or contracts, plus evidence that projected monthly energy savings exceed the increase in your mortgage cost.
Total EEM financing cannot exceed $6,000. It cannot be used for new construction, luxury items or work that does not reduce energy use. The improvements generally must be finished within six months after closing, and the funds stay in escrow until the work is verified.
Because the cap is lower than the FHA and conventional options, the VA version suits targeted upgrades such as insulation and sealing, a new water heater or a furnace replacement.
Fannie Mae and Freddie Mac conventional options
Conventional loans have the highest ceilings. That matters if you are planning a bigger project, such as a heat pump plus windows.
Fannie Mae HomeStyle Refresh. Fannie Mae states that eligible improvements may be financed for a purchase or limited cash-out refinance, but not a cash-out refinance, and that it applies to an existing home rather than new construction. Its FAQ says improvements may total up to 15% of the property’s as-completed value and may include paying off PACE loans, credit-card debt or home-equity credit used for earlier energy-related improvements. If you do the work yourself, the same FAQ restricts it to a one-unit, owner-occupied property that is not manufactured housing, caps it at 10% of as-completed value and requires inspections for work items costing more than $5,000.
Fannie Mae’s eligible-improvements guide lists a wide range: insulation, air sealing, windows and doors, duct sealing, high-efficiency HVAC, heat pumps, water heaters, ENERGY STAR products, solar, geothermal, low-flow fixtures and certain resilience measures.
Freddie Mac GreenCHOICE. Freddie Mac says energy-efficiency improvements may be financed with any mortgage product, property type and financing term up to 30 years, with maximum energy financing of 15% of the as-completed value. Qualifying improvements include programmable thermostats, caulking, weather-stripping, insulation, air sealing and high-efficiency heating or cooling equipment.
Both conventional programs are lender-delivered, so which one you can get depends on the lender you apply through. That is where comparing lenders pays off.

How to get an energy efficient mortgage, step by step
1. Decide the loan first. The EEM follows the loan. A veteran buying a home will look at VA. A buyer with a 580 credit score and a small down payment will likely look at FHA. Someone with solid credit and equity may fit conventional. Our FHA loan requirements checklist and guide to loan types for first-time buyers help you narrow this down. The common mistake is picking the upgrades first and then finding the loan cannot carry them.

2. Get the energy assessment. For FHA, a written HERS report is required. For others, an energy audit is how you learn which upgrades produce the biggest savings. Where it goes wrong: skipping the report, or getting one after the contract deadline has passed. Ask for it early in the purchase timeline.
3. Price the improvements. Gather itemized bids. On VA loans above $3,000 they are mandatory. On conventional loans, they set the figure the lender will finance. Keep upgrades to items that actually reduce energy use, because VA excludes work that does not.
4. Test the savings against the cost. See the next section. Do this before you commit, not after.
5. Apply with the full picture. Tell the loan officer about the planned upgrades at the start so the loan is structured with them in, rather than adjusted later. Having your income, asset and ID documents ready speeds things up, and our list of mortgage documents shows what to gather.
6. Close, then complete the work. Funds for the improvements are generally held in escrow until the work is done and verified. On FHA the escrow is set for no more than 90 days, or 180 for a 203(k) loan. VA generally expects completion within six months after closing.
Do the savings beat the added cost?
The test is straightforward. The Pacific Northwest National Laboratory’s analysis of retrofit financing explains that a package is approximately net-monthly-cost neutral when annual energy savings equal or exceed annual loan costs. It also notes that results depend on the home, interest rate, loan term and other assumptions. Its advice is to look at total monthly housing costs, not only the mortgage payment, since a larger loan can still make sense when verified utility savings cover the added cost.
Here is an illustration with assumed numbers, not a quote. Suppose you finance $8,000 of upgrades on a 30-year fixed loan at 6.5%. The added principal-and-interest payment is roughly $50.57 a month, or about $607 a year. If the upgrades are projected to cut your utility bills by $75 a month, you come out ahead by about $24 a month, and you also own a more comfortable home. If projected savings are only $30 a month, the loan costs more than it saves.
Three practical points:
- Rates move with the market and vary by lender and borrower, so run the math with the rate you are actually quoted. Our refinance calculator is a quick way to see payment changes.
- Use savings projected in the energy report, not a rule of thumb.
- A longer term lowers the monthly cost but raises total interest, so look at both.
If you are refinancing mainly to lower your rate, an EEM can add upgrades without a separate loan. Our guide on when to refinance helps you decide whether the timing makes sense.
Which situations suit an EEM
- First-time buyer in an older home. Drafty windows and an aging furnace are common. Financing the fix at closing avoids draining your savings right after the down payment.
- Homeowner refinancing. A rate-and-term or streamline refinance can carry upgrades, with the program depending on your loan type.
- Veteran buyer. The VA tiers suit modest, well-documented improvements.
- Larger project. If you want a heat pump or solar, the conventional programs’ higher ceilings are the better fit.
- Fast closing needed. An EEM adds an assessment and escrow step, so tell your lender about it up front rather than mid-process.
This article covers purchase and refinance loans. If you are a senior comparing a reverse mortgage with other ways to use home equity, our reverse mortgage line of credit guide is the better starting point.
What to keep in mind on rules
Program limits and eligible improvements are set by the agencies and can be updated, so confirm them on the program page before you apply. One rule change you may see mentioned: HUD’s June 2025 Federal Register notice removed a Green and Energy Efficient mortgage-insurance-premium category, but it applies to FHA-insured healthcare-facility programs, not to ordinary single-family EEM financing for homes.
Our view
We see the energy efficient mortgage as a financing decision first and an upgrade decision second. The upgrades only help if the loan underneath them fits your credit, your down payment and your timeline.
That is why we start with the loan. Our personalized consultations look at your goals, and our rate comparison across lenders shows what each loan type would cost you, whether you are buying a first home, refinancing, or using a VA or FHA loan. Once the loan is right, the efficiency package is far easier to size.
Our fully online application keeps the process simple, and many of our clients fund in under 21 days. If you plan to add upgrades, tell us at the start so we can build them into the structure of the loan from day one.
David Mordue
Start with the right loan
If you are buying or refinancing and want efficiency upgrades included, we can help you compare lenders and loan types, including FHA, VA and conventional options, through a fully online application. Our Home Purchase and Refinance services start with a personalized consultation, and you can see where rates stand on our rates page. See how mortgage rate shopping works before you compare offers.

FAQ
Can I get an energy efficient mortgage on a refinance?
Yes. FHA EEMs can be used for refinances, including streamline refinances, per HUD’s program overview. VA EEMs can be used with refinancing loans, and Fannie Mae allows its program on a limited cash-out refinance but not a cash-out refinance. Freddie Mac says its financing can be paired with any mortgage product.
Do I need an energy audit?
For FHA, yes: a qualified HERS representative or energy consultant must provide a written report. Other programs also rely on an assessment or documented cost and savings to size the improvements. It is smart to schedule it early so it does not slow your closing.
How much can I finance for upgrades?
It depends on the program. FHA allows the greater of $4,000 or 5% of property value, up to $8,000. VA caps it at $6,000. Fannie Mae and Freddie Mac allow up to 15% of the as-completed value, as stated on their program pages.
Will an energy efficient mortgage lower my monthly payment?
Not necessarily. The loan amount rises, so the mortgage payment does too. What you want is for verified utility savings to equal or exceed the added loan cost, so your total monthly housing cost stays level or falls.
Sources
- Energy Efficient Mortgages, US EPA
- Energy Efficient Mortgage Program Overview, HUD
- Connecting Constituents to Federal Programs That Fund Home Improvements, Congressional Research Service
- Ever heard of VA’s Energy Efficient Mortgages? VA News
- HomeStyle Refresh, Fannie Mae
- FAQs: HomeStyle Refresh, Fannie Mae
- Energy Eligible Improvements, Fannie Mae
- GreenCHOICE Mortgages, Freddie Mac Single-Family
- Deep Energy Retrofits cost-effectiveness, PNNL Building America
- Federal Register, June 26, 2025